点击图片查看原图
0.02 - 240 l/min KRACHT The gear type flow meters of the type VCA / VCN are flowmeters for liquids with a certain lubricity. The measuring unit of the KRACHT volume counter consists of a pair of gears, driven ...
Gear flow-meter
0.02 - 200 l/min, max 200 bar | VCA/VCN series KRACHT The gear type flow meter of the type VCG is a flow meter for liquids with a certain lubricity. The measuring unit of the KRACHT volume counter consists of a pair of gears, driven by ...
Gear flow-meter
1 - 65 l/min, max 315 bar | VCG series KRACHT The measuring mechanism of the KRACHT Volume counter VCL 0.1 for painting technology consists of a pair of gear wheels driven by fluid flow in accordance with the principle of operation ...
Gear flow-meter for paint and varnish
0.05 - 2 l/min, max 400 bar | VCL series KRACHT DuroTec? Gear Pumps DT 5 for abrasive and poor lubricating fluids.
In the year 1990, KRACHT initiated the development of Gear Pumps for abrasive and poor lubricating fluids.
Gear pump for abrasive liquid
150 - 250 cm3/r, max 100 bar | DuroTec? DT 5 series KRACHT Screw-type flow meters belong to the group of positive displacement flow meters. Two measuring spindles with a screw-shaped profile engage with each other. They are low-friction mounted ...
Helical screw flow-meter
1 - 1500 l/min, max 250 bar | SVC series KRACHT According to its design, the Kracht KP 0 external gear pump belongs to the type of so-called gland type pumps. The essential functional elements, gearing and bearing glands are located ...
High pressure gear pump
1 - 8 cm3/r, max 280 bar | KP 0 KRACHT Accordingly to its configuration the KRACHT external gear type pump series KP is to be classified into the category of the so-called gland type bearing pumps. All essential functional ...
High pressure gear pump
3 - 22 cm3/r, max 300 bar | KP 1 KRACHT Thanks to their construction (design principle) and the materials used KRACHT series KP 2/KP 3 external gear pumps are suitable for use under the most stringent operating conditions. ...
High pressure gear pump
20 - 62 cm3/r, max 300 bar | KP 2 KRACHT Thanks to their construction (design principle) and the materials used KRACHT series KP 2/KP 3 external gear pumps are suitable for use under the most stringent operating conditions. ...
High pressure gear pump
71 - 125 cm3/r, max 280 bar | KP 3 KRACHT KP series high pressure gear pumps are mainly used in oil-hydraulic plants. They are suitable both for hydraulic fluids as well as mineral oil bases (DIN 51524/25) and engine oils ...
High pressure gear pump
100 - 300 cm3/r, max 100 bar | KP 5 KRACHT Accordingly to its configuration the External Gear-Type Motor Series KM is classified in the category of the so-called Gland-Type Bearing Motors. All essential functional parts as ...
High pressure hydraulic gear motor
5.5 - 22 cm3/r, max 300 bar | KM 1 series KRACHT Hydraulic cylinders in the CNA Series are constructed with threaded piston rod ends. The cylinder heads and bases are made from Steel 52-3. The cylinders themselves are made from seamless ...
Hydraulic cylinder
40 - 125 mm ?, DIN 2391 | CNA series KRACHT The demand for reduced noise, reduced emissions and energy savings on mobile machines require alternative solutions for cooling systems. Beside the standard series of constant gear ...
Hydraulic fan drive system
KM 1 series KRACHT The thermovalve is a pre-controlled pressure relief valve with temperature-dependent pressure control and is mounted on the KRACHT KM gear motor in the place of the existing cover ...
Hydraulic gear motor with thermovalve
KRACHT A pilot valve operates the main control valve electrohydraulically. For operating the pilot valve, pressure-tight direct and alternating current magnets can be fitted switching in ...